dmd Epoxy Floor Primer and Sealer Set Clear 5kg

Description:

▪ 2-component epoxy resin system

▪ Consisting of epoxy resin and hardener

▪ Water-based (solvent-free)

▪ Colour transparent

Properties:

▪ Very easy to use, no specialist knowledge required

▪ Self-levelling after application with a paint roller

▪ Excellent adhesion on concrete, stone and wood floors

▪ Can even be applied on already coated substrates (multiple coating possible)

▪ One coat is enough for light traffic

▪ Creates a transparent finish

▪ Durable and long lasting

▪ Dust-free

▪ Impenetrable

▪ Odour-free

▪ Easy to clean

▪ Resistant to oils, fuels and lubricants, solvents and cleaning agents

▪ Resistant to chemicals – dilute acids, bases, salt and sugar

▪ Resistant to most bacteria

▪ Improves hardness of concrete floors

▪ Can be applied on to fresh concrete after 7 days

▪ Apply two coats if not used as a primer

▪ Application rate 5kg for 30-40m2

▪ Can be walked on and re-coated after approximately 12 hours

▪ Load resistant after 24-36 hours depending on temperature and humidity

▪ Complete chemical curing time 7 days

▪ Installation temperature +10°C to +30°C

▪ Installation conditions - substrate must be dry, clean, free of dust and grease

▪ Processing time after mixing maximum 90 minutes

Application:

▪ To be used as a primer for other epoxy floor coatings

▪ To be used as a sealer for concrete floors

▪ Or for light to medium traffic in commercial and industrial units of all kinds

▪ One coat is enough when used as a primer or for light traffic