dmd Anti-Slip Epoxy Floor Coat Medium Traffic light grey 5kg

Description:

▪ 3-component epoxy mortar system

▪ Consisting of epoxy mortar, aggregate and hardener

▪ Water-based (solvent-free)

▪ Thick anti-slip coating

▪ Colours: grey and light grey

Properties:

▪ Very easy to use, no specialist knowledge required

▪ Simple application with a paint roller

▪ Excellent adhesion on concrete, stone and certain asphalt floors

▪ Can even be applied on already coated substrates

▪ Only one coat needed

▪ Slip resistant surface R10 (ASR A1.5/1,2)

▪ Dust-free

▪ Impenetrable

▪ Odour-free

▪ Easy to clean

▪ Resistant to oils, fuels and lubricants solvents and cleaning agents

▪ Resistant to chemicals – dilute acids, bases, salt and sugar

▪ Resistant to most bacteria

▪ Improves hardness of concrete floors

▪ Application rate 5kg for 15-20m2

▪ Can be walked on after approximately 6 hours

▪ Load resistant after 24-36 hours depending on temperature and humidity

▪ Complete chemical curing time 7 days

▪ Installation temperature +10°C to +30°C

▪ Installation conditions - substrate must be dry, clean, free of dust and grease

▪ Substrate preparation by sanding and priming recommended (see Accessories)

▪ For open and porous substrates priming required, see Accessories

▪ Fresh concrete must be completely cured

▪ Processing time after mixing maximum 30 minutes

Application:

▪ All areas where anti-slip safety is essential

▪ For light to medium traffic in commercial and industrial units of all kinds

▪ Smaller stockrooms without forklift traffic

▪ Manufacturing facilities

▪ Shops

▪ Food industry

▪ Diaries, breweries, bakeries, butcher shops and slaughterhouses